Bluelab Dosetronic Peridoser Kit - Manual (Page 15)

11
Version P1.3 : 151012
Bluelab Dosetr
onic P
eridoser Kit
Bluelab Corporation Limited Bluelab Corporation Limited
Power Input
Temperature Power In Temperature Power Out
DC INPUT: 5V --- 3A
M anu factured in New Zealand b
y:
Bluelab Corporation Limite
d
8 Whiore
A ve
Tau rik o In dus tri al P ar k
Ta uran ga 314
0
N ew Z ea la nd
Conductivity
pH
Temperature
2.7 Probe connection and placement
pH and pH ATC
The pH probe provided has automatic
temperature compensation (ATC). It
connects to two separate sockets. The
sockets are labelled are pH and pH ATC.
Together they provide a temperature
compensated reading that is more
accurate than a standard pH probe.
Note: A standard pH probe with a BNC plug can
be used on its own with the Dosetronic but pH
readings will not be temperature compensated.
Conductivity Probe
This socket connects to the conductivity
probe that attaches to a “T” fi tting coming
off the inlet pipe on the sample pot.
Temperature Probe
This socket connects to the temperature
probe that can read air temperature or be
submerged in the sample pot to read the
solution temperature.
Temperature
Conductivity pH
pH ATC
2