Bluelab Dosetronic Peridoser Kit - Manual (Page 17)

13
Version P1.3 : 151012
Bluelab Dosetr
onic P
eridoser Kit
Bluelab Corporation Limited Bluelab Corporation Limited
Po
w e r
pH Dosing system
Temperature
Conductivity
pH ATC Alarm
Power Input DC INPUT: 5V --- 3A
Temperature Power Out Temperature Power In
2
2.9 External Alarm and Lockout Box
The alarm box has three functions:
1. It has an Internal alarm that sounds when a
designated alarm setting has been breached. This
feature can be enabled/disabled manually by opening
up the alarm casing and moving the link (see diagram
on next page)
2. It can also be connected to an alternative external
alarm e.g. a horn or fl ashing light. This can be done
through the external alarm wiring terminals provided
(see diagram on next page).
3. It has an External Lockout function. When an
external lockout function is sensed in control mode
(e.g through a water fl ow switch) the Dosetronic will
stop all control and dosing. The external lockout
terminal can be accessed on
the circuit board found inside
the alarm box
(See diagram on next page).
2.10 Mount external Alarm
Box
1. Locate appropriate area on the
wall for the Alarm box.
2. Secure box to wall with self
tapping screws provided.
Alarm Box
External Lockout
Sensor
External Alarm
Mounting points
Note: If no functions provided by the
Alarm Box are required, it does not need
to be installed/connected.