Bolide SVR9000D - Manual (Page 43)

User Manual
42
6.3.3.2 Record
Click <Record> option to unfold its sub-options: Record parameter, Schedule and Main stream.
1、 Record Parameters: Under [Record parameters] option, allow you set channel, record enable, pack time
and Pre-record status shown as Picture 6-1
2、 Schedule: Detailed parameters please refer to DVR local setting.
Green stand for Normal record; Yellow stands for Motion detection; Red stands for I/O triggered record.
3、 Main Stream: detailed settings please refer to DVR local setting. Herein allow user modifies the resolution,
frame rate, Bit rate and audio of the record channel.
6.3.3.3 Network Parameters
Unfold <Network> option to enter into its sub-options: Network, sub stream, Email, mobile and DDNS
configuration.
1、 The model support three network type, including Static, DHCP and PPPoE
Static: System default <Static> as its network type. User could allocate IP and perform Port forwarding for
DVR according to different router. When set <UPNP> to “On”, user no needs to perform port forwarding.
Picture 6-16
Picture 6-15
Picture 6-17