Brinly STH-420 BH Lawn Sweeper - Manual (Page 14)

1009727-A 14.
ASSEMBLY
================================================================================================
34
6
24
15
38
25
5
A
Using the hardware in Panel 11, assemble Hamper Mounts
(5) to Upper Side Tubes (38) as shown in Figure 11. Ensure
that the hole closer to the end of the upper side tube (A) is
used as shown.
Note: Tighten Nylon Lock Nut (25) completely and then
loosen enough so that the Hamper Mount (5) pivots freely.
Assemble Vinyl Caps (24) to Hamper Mounts (5) as shown.
Figure 11