BUG-O Systems BGW-5000 - Manual (Page 33)

33
Wire Diameter Φ2.4mm; F = Front; B = Back
A) Shell Wall Thickness 12MM
WTδ=12 Current (A) Voltage (V) Travel Speed
cm/min
F⑴12mm 380～400 25～26 50～60
B⑴12mm 360-380 25～26 50～60
F⑵12mm 400 26 55～65
B⑵12mm 380 25 55～65
F⑶12mm 380 25 65～70
B⑶12mm 380 25 65～70
F⑷12mm 360 24～25 70～75
B⑷12mm 350 24～25 70～75
B) Shell Wall Thickness 10MM
WTδ=10 Current (A) Voltage (V) Travel Speed
cm/min
F⑴10mm 360～380 25～26 70～75
B⑴10mm 360 26 70～75
F⑵10mm 380 24～25 75～80
B⑵10mm 360 24～25 75～80
F⑶10mm 350 25 80～85
B⑶10mm 320 24 80～85
C) Shell Wall Thickness 8MM
WTδ=8 Current (A) Voltage (V) Travel Speed
cm/min
F ⑴8mm 320 24 80～85
B⑴8mm 300 23 80～85
F⑵8mm 300 24 85～95
B⑵8mm 280 24 85～95
Note: The serviceability of a product or structure utilizing the information in these guidelines must be the
sole responsibly of the builder. Many variables in design, fabrication and service conditions affect the results
obtained in applying this type of information. BUG-O systems is not responsible for any welding parameters
or guidelines for the BGW machines and or the SAW process.
Please have all parameters for SAW provided prior to the beginning of setup of machines.
We do offer a starting guide for parameters in our instruction manual, this is just a guide and not an exact
set of parameters to be followed.