DFI BT9A3 - Manual (Page 12)

www.dfi .com Chapter 3 Hardware Installation
12
Chapter 3
System Memory
The system board is equipped with nine DDR3L memory chips onboard.
• 2GB/4GB DDR3L ECC memory down
• Supports DDR3L 1333MHz (-E45/-E27/-J00/-N30/-N07)
Supports DDR3L 1066MHz (-E26/-E25/-E15)
• Supports single channel memory interface
Important:
Electrostatic discharge (ESD) can damage your board, processor, disk drives, add-in
boards, and other components. Perform installation procedures at an ESD workstation
only. If such a station is not available, you can provide some ESD protection by wear-
ing an antistatic wrist strap and attaching it to a metal part of the system chassis. If
a wrist strap is unavailable, establish and maintain contact with the system chassis
throughout any procedures requiring ESD protection.
System Memory
DDR3L
Top View
DDR3L
Bottom View
DDR3L
DDR3L