Chapter 4 – DFI BT9A3 User Manual
Page 37
www.dfi .com
Chapter 4 BIOS Setup
37
Chapter 4
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Audio Confi guration
Audio Controller
Azalia HDMI Codec
DP/HDMI Port C
[Enabled]
[Enabled]
[Disabled]
Chipset
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Reset
ESC: Exit
Azalia HD Audio
This section configues Azalia HD Audio options.
Control Detection of the
Azalia device. Disabled =
Azalia will be uncondition-
ally disabled. Enabled =
Azalia will be uncondition-
ally enabled. Auto = Azalia
will be enabled if present
disabled otherwise.
Audio Controller
This item controls the detection of the Azalia device.
Disabled
Azalia will be unconditionally disabled.
Enabled
Azalia will be unconditionally enabled.
Auto
Azalia will be enabled automatically.
Azalia HDMI Codec
Enable or disable the internal HDMI codec for Azalia.
DP/HDMI Port C
Enable or disable the DP/HDMI Port C.
Azalia HD Audio Options
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Chipset
Select Screen
Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized
Defaults
F4: Save & Reset
ESC: Exit
South Bridge
This field is used to configure the parameters of the South Bridge.
Azalia HD Audio
PCI Express Confi guration
Restore AC Power Loss
Intel(R) I210 Controller
[Power Off]
[Enabled]
Restore AC Power Loss
Power Off
When power returns after an AC power failure, the system’s power is off. You
must
press the Power button to power-on the system.
Power On
When power returns after an AC power failure, the system will automatically power-on.
Last State
When power returns after an AC power failure, the system will return to the state
where you left off before power failure occurs. If the system’s power is off when AC
power failure occurs, it will remain off when power returns. If the system’s power is on
when AC power failure occurs, the system will power-on when power returns.
Intel(R) I210 Controller
Enable the Intel(R) I210 ethernet controller.