DFI BT9A3 - Manual (Page 35)

www.dfi .com Chapter 4 BIOS Setup
35
Chapter 4
LCD Control
Select the Video Device
which will be activated
during POST. This has no
effect if external graphics
present.
Secondary boot display
selection will appear
based on your selection.
VGA modes will be sup-
ported only on primary
display.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
LCD Control
Primary IGFX Boot Display
Secondary IGFX Boot Display
LCD Panel Type
LVDS Support
[DDI-1]
[DDI-0]
[Type 3 1024x768...]
[Enabled]
Chipset


Enter:
+/-:
F1:
F2:
F3:
F4:
ESC:
Select Screen
Select Item
Select
Change Opt.
General Help
Previous Values
Optimized Defaults
Save & Reset
Exit
Primary IGFX Boot Display
Select the Video Device which will be activated during POST. This has no effect if the
external graphics presents. The selection of secondary boot display will appear based
on your selection. VGA modes will be supported only on primary display.
Secondary IGFX Boot Display
Select the secondary display device: DDI-0 or DDI-1. DDI-0 is the default setting.
Intel IGD Configuration
Enable: Enable Integrated
Graphics Device (IGD)
when selected as the
Primary Video Adaptor.
Disable: Always disable
IGD.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
GOP Information
Intel(R) GOP Driver
 Integrated Graphics
Chipset
 Select Screen
 Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous
Values
F3: Optimized Defaults
F4: Save & Reset
ESC: Exit
[N/A]
[Enabled]
Integrated Graphics
Enable or disable the integrated graphics device (IGD). When enabled, the integrated
graphics device is selected as the primary video adaptor.