DFI COM101-BAT - Manual (Page 11)

www.dfi .com Chapter 2 Hardware Installation
11
Chapter 2
Panel Power Select
The JP5 is used to select the power supplied with the LCD panel.
Important:
Before powering-on the system, make sure that the power settings of JP5 match the
LCD panel’s specification. Selecting the incorrect voltage will seriously damage the
LCD panel.
1-2 On: +12V
3-4 On:+5V
5-6 On: +3.3V
(default)
LCD/Inverter Power Select
1-2 On: +12V
2-3 On:
+5V (default)
3
1
2
3
1
2
The JP8 is used to select the power level of LCD inverter connector.
JP8 JP5
1
3
5
2
4
6
1
3
5
2
4
6
1
3
5
2
4
6