DFI COM330-B - Manual (Page 17)

17
2
Hardware Installation
1
ON
4
5
1
ON
4
5
Clear CMOS
JP10
2-3 On:
Clear CMOS
1-2 On: Normal
(default)
3 1 2
3 1 2
If you encounter the following,
a) CMOS data becomes corrupted.
b) You forgot the supervisor or user password.
you can reconfi gure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set JP10 pins 2 and 3 to On. Wait for a few seconds and set JP10 back to its
default setting, pins 1 and 2 On.
3. Now plug the power cord and power-on the system.