DFI COM330-B - Manual (Page 39)

39
2
Hardware Installation
1
ON
4 5 1
ON
4
5
SATA (Serial ATA) Connectors
7
RXN GND TXP TXN GND
1
RXP
GND
SATA 2.0 3Gb/s
SATA 2
SATA 3 SATA 1
SATA 0
SATA 3.0 6Gb/s
The Serial ATA connectors are used to connect Serial ATA devices. Connect one
end of the Serial ATA cable to a SATA connector and the other end to your Serial
ATA device.
BIOS Setting
Refer to the module’s BIOS for more information.
Features
• SATA 0 and SATA 1 support data transfer rate up to 6Gb/s
• SATA 2 to SATA 3 support data transfer rate up to 3Gb/s
• Integrated Advanced Host Controller Interface (AHCI) controller
• Supports RAID 0, RAID 1, RAID 5 and RAID 10