Diamondback Fitness 510Ub - Manual (Page 26)

26
Note: Changing the units will erase all user data.
Model Number “SET MODEL NUMBER” will post in the lower display field. “510Sr”, “510Ub” or “510Er” will scroll in the Matrix
Display, depending upon current setting. Confirm the model number of your unit. Use the UP and DOWN arrow
keys to view the available settings. When the correct model is displayed, press ENTER to select and launch the
Sound Settings mode.
Sound Settings “SOUND SETTINGS” will post in the lower display. “On” or “Off” will flash in the Matrix Display, depending upon the
current setting. Scroll between the two settings via the UP and DOWN arrow keys, pressing the ENTER key to
confirm the selection and launch the Backlight Settings mode.
Backlight Settings “BACKLIGHT LEVEL” will post in the lower display. “Hi” or “Low” will flash in the Matrix Display, depending upon the
current setting. Scroll between the two settings via the UP and DOWN arrow keys. Confirm the setting by pressing
the ENTER key. Demo Mode Settings will launch
Demo Mode Setting “DEMO MODE ON/OFF” will post in the lower display. “Off” or “On” will flash in the Matrix Display depending upon
the current setting. Scroll between the two setting via the UP and DOWN keys.
 Demo Mode On = console never powers off.
 Demo Mode Off = console power off after thirty (30) seconds of inactivity.
QUICK START PROGRAM
The QuickStart program option is for users who wish to bypass the User Setup mode and immediately launch a workout session. Adjustments
to the resistance can be made at any time via the UP and DOWN keys.
Selection Press the GO/Quick Start key to launch the Manual program with the following defaults values:
 Time = 30 minutes
 Resistance Level = 1
Launch Once the program begins:
 Program Run Time will count down from 30:00 minutes.
 The Pulse display will show a heart rate if a signal is detected via the touch heart rate sensors.
 The Matrix Display will show the workout profile.
 The lower data display fields will track Distance, Calories, RPM & Speed.
 The user may adjust the resistance level from 1 to 16 during the program via the UP and DOWN arrow keys.
 Press the STOP key once to enter the Pause mode. Pressing the STOP key again will return the console to Program Run mode.
End When thirty (30) minutes have elapsed, the Workout Summary will be displayed.