Diamondback Fitness 510Ub - Manual (Page 28)

28
Selecting From the Idle screen, press the HEART RATE key on the console one time. The Heart icon will post in the Matrix Display. “TARGET
HEART RATE” will post in the lower display. Press the ENTER key to launch the Heart Rate Program Setup Mode for the Target
Heart Rate program.
Setup User: “SELECT USER” will scroll in the lower display. “User 1” or the custom name for the User 1 profile will scroll in the Matrix
Display. Select this profile or use the UP and DOWN arrow keys to scroll through the available profiles. Press the ENTER key to
confirm.
Age: If the Guest profile is selected, the user is prompted to enter their age. This data is not stored and will be reset at the
conclusion of the program. Adjust the flashing value via the UP and DOWN arrow keys, confirming the selection by pressing the
ENTER key.
When the User 1 or User 2 profiles are selected, any previously‐stored user data will be referenced to operate the program. If no
data has been entered for these profiles, the User Setup mode will launch (see the section titled User Setup Mode), allowing the
user to update the selected profile.
Target Heart Rate Value: The user will be prompted to enter a target heart rate value. Choose a heart rate that is between 50%
and 85% of your calculated maximum heart rate via the UP and DOWN arrow keys.
Launch Press ENTER to confirm heart rate target and launch the Target Heart Rate program.
A heart rate signal must be received for the heart rate programs to operate. If a signal is not received, the No Signal symbol will
light and the lower display will prompt the user.
All console fields will be begin tracking the workout data. The heart rate field will display the current heart rate, while the bar
graph provides an estimate of the current user’s calculated maximum heart rate percentage.
Resistance adjustments will be controlled by the program to ensure that the user’s heart rate remains within +/‐ four (4) BPM of
the selected target heart rate.
The Matrix Display will post a horizontal line of segments to represent
the user’s selected heart rate target. The flashing segment will indicate
the user’s progress within the program. A flashing segment that is below
the horizontal line indicates that the user’s heart rate is lower than the
selected target. Conversely, a flashing segment above the horizontal line
signifies a heart rate that exceeds the user’s target.
If the current heart rate is within the target range, the Target Heart Rate
Achieved icon will light.