Diamondback Fitness 510Ub - Manual (Page 32)

32
 The Calories field will record the number of calories burned during the workout session.
 RPM or revolutions per minute and Speed will be displayed.
Ending a Classic Program
At any time during the program, the user may press the STOP key to pause the programming. To end the program and view the Workout
Summary, press the STOP key twice while the program is running. Pressing the STOP key three (3) times while the program is running will end
the program, bypass the Workout Summary and return the console to Idle mode.
USER SETUP MODE
The User Setup mode may be launched in two ways:
 To manually enter the User Setup mode, press and hold the RIGHT arrow key for two (2) seconds.
 During the Program Selection mode, if a user profile is selected for the first time, User Setup mode will launch automatically, then
return to the Program Setup mode.
When the User Setup mode is launched, “User 1” will display in the Matrix Display. Use the UP and DOWN arrow keys to view the user profile
options (“User 1” or “User 2”). Press ENTER when the desired profile is displayed.
User Name Data Entry
“User 1 Name” or “User 2 Name” will post in the lower display and “U1” or “U2” will post in the Matrix Display field (depending upon which
user profile was selected). If the user name has been previously adjusted, the entered name will then scroll once and post with the first
character blinking. Adjust this character of the user name via the UP and DOWN arrow keys. Press the RIGHT arrow key to confirm the
character selection and move to cursor the next character. The choice of available characters is A ‐ Z, a ‐ z, 0 ‐ 9 and the “_” (space). The user
may store up to ten (10) characters for each user name. If the desired name is less than ten (10) characters, press ENTER to save settings and
launch Workout Time data entry.
User Workout Time Data Entry
“Workout Time” will post in the lower display and the default value of “30:00” (or the previously‐adjusted value) will flash in the Total Time
display. Use the UP and DOWN arrows to adjust the workout time for this user profile. The range for workout time is 01:00 to 1:59:00. Press
ENTER to confirm the workout time and enter Age data entry.
User Age Data Entry