Diamondback Fitness 510Ub - Manual (Page 33)

510Ub Owner’s Manual
33
“User 1 Age” or “User 2 Age” will post in the lower display (depending upon which user profile was selected). The default or previously‐
adjusted user age value will flash in the Matrix Display. Use the UP and DOWN arrows to adjust the age for this user profile. The available user
age value must be between ten (10) and ninety‐nine (99) years, inclusive. Press the ENTER key to confirm the age setting and enter User
Weight entry.
User Weight Data Entry
“User 1 Weight” or “User 2 Weight” will post in the lower display (depending upon which user profile was selected). The default or previously‐
adjusted user weight value will flash in the Display Matrix. Use the UP and DOWN arrows to adjust the weight for this user profile. The
available user weight value must be between 23 and 350 pounds (10 and 150 Kilograms in the console is is set to metric unit), inclusive. Press
the ENTER key to confirm the weight setting and enter User Gender entry.
User Gender Data Entry
“User 1 Gender” or “User 2 Gender” will post in the lower display (depending upon which user profile was selected). The default or previously‐
adjusted user gender value will scroll in the Display Matrix. Use the UP and DOWN arrow keys to view the user gender options (“Male”,
“Female”). To select the displayed gender setting, press the ENTER key. Press the ENTER key to return to the User Setup selection mode, or
press GO or STOP to save all adjusted settings and return to banner mode or previous program.
MAINTENANCE
All Diamondback Fitness products are engineered for years of near‐silent operation. Let noise be your first indication that a repair or
adjustment is required. Please, discontinue use immediately and contact an Authorized Service Technician or Diamondback Fitness Dealer if an
unusual noise, scraping, knocking, grinding or vibration is detected. Often, a minor issue will become a major repair if ignored and use is
continued.
Prior to each workout, confirm that all adjustment levers and screws are tightened.
Your Diamondback Fitness product is manufactured of the most durable materials available. The plastics are molded of strong and chemical‐
resistant ABS and PVC. The frame is produced of high‐tensile steel and protected with an industrial‐grade, powder paint coating for the
highest level of corrosion resistance. It is important to note however, that perspiration can be extremely corrosive if allowed to accumulate on
the machine. After training, always wipe down the unit with a mild soap solution followed by a thorough drying with a clean towel. Positioning
a small spray bottle and towel near the unit will help ensure that your Diamondback Fitness equipment looks new for many years.
NOTE: Perspiration is very corrosive and if allowed to remain on the machine, will cause discoloration, fading, rust and
odors. Unfortunately, these conditions are not covered under the Warranty Policy.