Diamondback Fitness 510Ub - Manual (Page 29)

510Ub Owner’s Manual
29
End To end the program at any time, press the STOP key, twice. The workout summary will be displayed for thirty (30) seconds then
the console will return to the Idle mode. Press STOP again to return to the Idle mode.
Percentage Heart Rate Programs ‐ Overview, Selection, Setup, Launch & End
Overview The Percentage Heart Rate programs can also be described as “percent‐of‐maximum heart rate” programs. The setup and
operation of these programs is similar to the Target Heart Rate programming except the console will automatically determine
the specific pulse rate target based on the data entered in the user profile and the selected percentage (50%, 60%, 70% & 80%)
of their calculated maximum heart rate. See the section titled Calculated Maximum Heart Rate.
Selecting From the Idle screen, press the HEART RATE key on the console two times. The Heart icon will post in the Matrix Display followed
by “50%”. “50% MAX” will post in the lower display. This program will automatically adjust the workout resistance level so that
user’s effort will generate a heart rate equal to 50% of their calculated maximum. Scroll through the available programming
options (50%, 60%, 70% & 80%) and make a selection by pressing the ENTER key.
Setup User: “SELECT USER” will scroll in the lower display. “User 1” or the custom name for the User 1 profile will scroll in the Matrix
Display. Select this profile or use the UP and DOWN arrow keys to scroll through the available profiles (User 1, User 2) and press
the ENTER key to confirm.
Age: If the Guest profile is selected, the user is prompted to enter their age. This data is not stored and will be reset at the
conclusion of the program. Adjust the flashing value via the UP and DOWN arrow keys, confirming the selection by pressing the
ENTER key.
When the User 1 or User 2 profiles are selected, any previously‐stored user data will be referenced to operate the program. If no
data has been entered for these profiles, the User Setup mode will launch (see the section titled User Setup Mode), allowing the
user to update the selected profile. The selected program will then launch.
Launch Press ENTER to confirm heart rate target and launch the Target Heart Rate Program. A heart rate signal must be received for the
heart rate programs to operate. If a signal is not received, the No Signal symbol will light and the lower display will prompt the
user.
All console fields will begin tracking the workout data. The heart rate field will display the current heart rate, while the bar graph
provides an estimate of the current user’s calculated maximum.
Resistance adjustments will be controlled by the program to ensure the user’s heart rate remains within +/‐ four (4) BPM of the
selected target heart rate.
The Matrix Display will post a horizontal line of segments to represent the user’s selected heart rate target. The flashing segment
will indicate the user’s progress within the program. A flashing segment that is below the horizontal line indicates that the user’s