GAI-Tronics Elemec3 Portal User Manual - Version 1.2 - Manual (Page 10)

Pub. 42004-485A
Elemec3 Portal User Manual Version 1.2 Page 8 of 35
f:\standard ioms - current release\42004 instr. manuals\42004-485a.docx
02/14
Administration Utility Screen
Upon connecting to an E3 Controller, the Administration Utility screen appears. An example appears in
Figure 9 below. This screen provides the “gateway” access to Elecmec3 system features. Its
functionality depends on the level and permissions of the current user. The current user and the user level
are always identified at the bottom of the screen. The user can be switched using the S
WITCH U SER
button.
The function of the buttons indicated with “A” through “M” in the example in Figure 9 below are defined
in Table 1 and examples of their use are included in this manual.
Figure 9. Elemec3 System Administration Utility screen
Table 1. Elecmec3 System Administration Utility Screen Button Functions & Fault Notification Panel
Notation Name Description
Messages
(MSG) Button
Displays any system messages. System messages are notifications that
do not qualify as faults or events. Refer to page 11 for further
information.
Tick Tones
Button
Displays the Tick Tones screen. The Tick Tone is generally used for
testing the speakers. See “Tick Tone” section of this manual on page
12 for details.