GAI-Tronics Elemec3 Portal User Manual - Version 1.2 User Manual
Page 8
Pub. 42004-485A
Elemec3 Portal User Manual Version 1.2
Page 6 of 35
f:\standard ioms - current release\42004 instr. manuals\42004-485a.docx
02/14
Enter the IP Address/Host Name of the E3 system when the screen shown in Figure 7 below appears, and
click the red C
ONNECT
button.
.
Figure 7. Manual Connection screen
Upon successful auto discovery of E3 systems, the screen shown in the example in Figure 8 appears.
Each entry represents a different E3 Controller. The names that appear in the list are the names of the
configuration files that are currently running on an E3 Controller.
Figure 8. Elemec Auto Discover Screen
Select the desired controller from the list and click the red C
ONNECT
button. The connected system is
referred to as the “local” system.