Set as default configuration, Remove configuration – GAI-Tronics Elemec3 Portal User Manual - Version 1.2 User Manual
Page 25
Pub. 42004-485A
Elemec3 Portal User Manual Version 1.2
Page 23 of 35
f:\standard ioms - current release\42004 instr. manuals\42004-485a.docx
02/14
Set As Default Configuration
Highlight the desired configuration on the Stored Configurations panel and click the S
ET
A
S
D
EFAULT
button. The Confirm Set Default Configuration window will appear as shown in Figure 35. Click the
S
ET
D
EFAULT
C
ONFIGURATION
button to continue.
Figure 35. Confirm Set Default Configuration screen
N
OTE
: It is good practice to set a copy of the running configuration as the default.
Remove Configuration
Highlight the desired configuration on the Stored Configurations Panel and click the R
EMOVE
C
ONFIGURATION
button. The Confirm Configuration Removal screen as shown in Figure 36 will appear.
Click the R
EMOVE
C
ONFIGURATION
button to continue.
Figure 36. Confirm Configuration Removal screen