Amplifier status list, Status filter – GAI-Tronics Elemec3 Portal User Manual - Version 1.2 User Manual
Page 34
Pub. 42004-485A
Elemec3 Portal User Manual Version 1.2
Page 32 of 35
f:\standard ioms - current release\42004 instr. manuals\42004-485a.docx
02/14
Amplifier Status List
The Amplifier Status list displays each amplifier and its current operating condition. Remote amplifiers
will be designated by the [R] prefix.
Fault status – indicates Normal or Faulted status.
Audio Status:
OFF – indicates amplifier is idle.
MIX 1/MIX 2 – indicates amplifier active audio source.
HOT STANDBY – indicates designation as a Hot Standby Amplifier.
Standby – if the amplifier channel is faulted, the configured Hot Standby amplifier description is
displayed.
Standby FOR – If a Hot Standby amplifier is currently in use, the description of the faulted amplifier
channel is displayed.
Status Filter
All – Displays all amplifiers.
Active/Faulted – Amplifiers can be filtered to display active/faulted only.