Guntermann & Drunck LwLVision-USB 2.0 - Manual (Page 12)

Installation
9 · G&D LwLVision-USB 2.0
Installing the user module
Connecting console monitor, mouse, and keyboard
DVI Out: Connect the digital console monitor to this interface.
VGA Out: Connect the analog console monitor to this interface.
USB Keyb./Mouse: Connect the USB keyboard and/or USB mouse to this interface.
PS/2 Keyb./Mouse: Connect the PS/2 keyboard and/or PS/2 mouse to this interface.
Optional: Connecting USB 2.0 devices
USB 2.0 Devices: If desired, connect up to two USB devices at the front side.
USB 2.0 Devices: If desired, connect up to two USB devices at the back side.
NOTE: The video signal of the computer connected to the computer module can
either be displayed at a digital or analog monitor.
NOTE: Both mouse and keyboard of the remote console can either be PS/2 or USB
devices.
Trans. Tx Rx
USB 2.0 Trans.
Tx Rx
RS 232 Micro In Speaker
Service Red. Power USB 2.0 Devices
Main
Power
VGA Out DVI Out
Mouse Keyb. PS/2 Mouse Keyb. USB
USB 2.0
Devices
Status
Active
Local Remote
Main
Red.
Power
USB 2.0 Devices Trans. Tx Rx
USB 2.0 Trans.
Tx Rx
RS 232 Micro In Speaker
Service VGA Out DVI Out Red. Power
Mouse Keyb. PS/2
Main
Power
Mouse Keyb. USB