The lwlvision-usb 2.0 series – Guntermann & Drunck LwLVision-USB 2.0 User Manual
Page 6
The LwLVision-USB 2.0 series
3 · G&D LwLVision-USB 2.0
The LwLVision-USB 2.0 series
KVM extenders of the LwLVision-USB 2.0 series transmit keyboard, mouse and USB
signals as well as the video signal between a remote console and the computer.
Additionally, the KVM extender supports bidirectional transmission of audio signals
and also transmits signals of a serial device between the remote console and the com-
puter.
An LwLVision system consists of two main components:
Computer module:
The computer to be operated is connected to the computer
module (LwLVision-PC).
In addition to the remote console, an (optional) local console can be installed at
the computer module.
User module:
The devices of the remote console (monitor, keyboard, mouse, and
USB devices) are connected to the user module (LwLVision-Rem).
Fibre optics connect the computer module to the user module. The maximum dis-
tance to be bridged depends on the quality of the fibre optics:
NOTE:
Information on how to operate and configure the LwLVision system are
given in the separate »Installation and Operating Guide«.
Type of fibre optics
max. cable length
Multi-mode fibre
550 metres
Single-mode fibre
2 kilometres
NOTE:
The KVM extenders of the LwLVision-USB 2.0 series are available as mulit-
mode or as single-mode variant.