Guntermann & Drunck CATpro2-VT100 - Manual (Page 11)

Guntermann & Drunck GmbH Installation- and configuration Guide
CATPro2 VT100
Page 11
If a sent data stream is not automatically echoed by the serial device (after
prompting, in the terminal window are no characters visible), activate the "Local
echo" box.
In the Drop-Down menu „Encoding“ you can define, how the charactes, send
from the PC to the terminal, should be interpreted. In default the setting is „ISO
8859-1“. This setting is appropriate for most of the applications. However, if you
work with a Windows 2003 Server-console we recommend to change the value
to UTF-8 (Unicode).
In the "Appearance" panel you can define the appearance of the terminal
window.
Select the colour scheme in which the terminal window is to be displayed in the
"Color scheme" field.
By marking the "Blinking cursor" box, you instruct the terminal program to
display a blinking cursor. The cursor only blinks when the terminal window is
active. If you select a menu item from the menu bar, the cursor stops blinking.
By marking the "Visible bell" box, you instruct the terminal program to indicate
that the serial device has output a warning or informational signal by flashing
the screen.
By marking the "Inverse" box, the terminal window is displayed in the inverse
of the selected colour scheme.
In the "Display" panel you can define the size of the terminal window. The
following resolutions are available:
• 800 x 600
• 1024 x 768
All settings made here are accepted by clicking on the OK button. Cancel
closes the menu without saving the changes and you return to the terminal
window.