Pedestal control – ILS ILS22G winXP User Manual
Page 25
23
Pedestal control.
If the ILS22 is mounted on an electrical pedestal (the ILS Powerlift), it can be elevated up or down .
The ILS22 has build-in relays for control functions.
By default, relays 22 and relays 23 are reserved for driving the motor in the optional electrical pedestal from ILS
(supplied with the ILS22G).
One can define the number of seconds the relays will be closed (number of seconds for up/down movement).
Default is 2 seconds.
If under direct control of the lectern (ILStranslator), the following form will show up.
Via Powerlift Calibration you can specify (‘Mark’) the lowest setting, which in turn will be used to provide a calculated
indication in ILStranslator (and Remote-Q) what the current height is calculated in cm’s and inches.
This calculated indication is shown in ILStranslator/Extra Buttons.