ILS ILS22G winXP - Manual (Page 7)

5
table 2
Commands backlight lector ILS
turn led on/off
Initialization
Command: $xx_y? Change led dimmer frequency
Example: $02_2? Command: $F_xxx?
Meaning: leds of field 2 are dimmed Example: $F_007?
Meaning: Change the frequency of all the led dimmers
to 20 Hz
$ start sign
xx field number $ start sign
_ delimiter F frequency
y= 0 led off _ delimiter
1 led on xxx value for frequency (0-255)
2 led dimmed ? end of command
? end of command Frequency is calculated as follows:
Fields
01
Room control / Keyboard button frequency=1/( (xxx+1) / 152)
02 Room control field* xxx =152 * (1/f) -1 f=frequency
03 Keyboard
04 Display out and Shortcut fields Fill in the desired frequency 20 Hz
05 Annotate button
06 Annotation keys Value for xxx 7
07 Touchpad real frequency due to rounding 19 Hz
08 Arrow keys
09
10
Change duty cycle
11 Projector status red light Command: $Dxx_yyy?
12 Touchscreen field Example: $D05_179?
13 Touchscreen on (red) Meaning: Change the duty cycle of field 5 to 70%
14 Mute mic (red)
15 PC Audio + (red)
16 Audio L1 $ start sign
17 Audio L2 D Duty Cycle
18 Audio L3 xx field
19 Audio L4 _ delimiter
20 Audio L5 yyy value for Duty Cycle
21 Arrow up/down (green) ? end of command
22 Relay 1
23 Relay 2
24 Relay 3 Fill in the desired Duty Cycle 70%
25 Relay 4
26 Relay 5 Value for yyy 179
27 Relay 6
28 Relay 7 Real Duty Cycle due to rounding 69.92188 %
29 Relay 8
30 Relay 9
31 Relay 10
5