Kanguru Mini Clone - Manual (Page 22)

22
5.1.2 Disconnecting a Device
To disconnect a device connected to your PC via the miniClone:
1. Press the ENTER button. The unplug device menu appears.
Device Mode
Disk1 117GB
Yes
Yes
No Unplug?
2. Press the Up or Down directional button to select Yes, and then press the ENTER button to
disconnect the device.
Caution! Make sure that no data is being transferred to the hard drive before disconnecting the hard
drive from your computer. If necessary, use your operating system’s Safe Hardware Removal procedure
to ensure that no programs are accessing the drive before you disconnect it.
Disconnecting a Device