Kanguru Mini Clone - Manual (Page 33)

33
5.5.3 Seek Test
Seek Test performs a full-stroked seek test on a hard drive. The Seek Test checks the hard drive’s physical
status to make sure that no read heads are damaged.
To run a Seek Test:
1. From the main menu, select Check and then press the ENTER button.
2. From the Check menu, select Seek Test and then press the ENTER button.
3. Select the location of the hard drive that you want to the Seek Test on and then press the ENTER
button. The hard drive needs to be connected to either Disk 2 or Disk 4.
4. A confirmation screen appears. Select Yes and then press the ENTER button. The Seek Test process
begins.
Note: The Seek Test will not finish automatically, you need to manually cancel the Seek Test. For more
information about canceling a process, see section 4.3 Pausing and Cancelling a Process, p.17 .
Seek Test