Standard Horizon HX-300 - Manual (Page 3)

Page 3 HX300
Q
uick
R
efeRence
G
uide
This transceiver is equipped with the E2O (Easy-To-Operate) system. You
can do the basic operation in numerical order of the illustration below.
Press and hold the key to turn on or off the radio.
Press the key (“ VOL” indicator blinks), then press the / key to
adjust the speaker audio volume.
Press the / key to selects the operating channel.
Press the key two times (“ SQL” indicator blinks), then press the
key to squelch or press the key to un-squelch the radio.
Press the key to toggle the transmit power between High (5W) and
Low (1W).
Press the key briefly to recall channel 16.
Press and hold the key for two seconds to recall channel 9.
Press the key again to revert to the last selected channel.
Place your mouth about 1 inch (2.5 cm) away from MIC hole and speak
in a normal voice level while pressing the PTT switch.
MIC Hole