Soft keys setup – graphical display only, General introduction, Soft keys setup – Datamax 123 Print v1.1x User Manual
Page 112: Section, 1 - soft keys setup
Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 3 : Creating a Project
3.5.1.
Soft Keys Setup – Graphical Display Only
General introduction
This section describes the Soft Key setup for your graphical display
123 Print projects.
As described in Section 3.2 – User Interface, a 123 Print graphical
display printer project provides a Footer option to display the function
of the Datamax printer keys.
123 Print allows you to define the function of these keys on a project-
by-project basis, thus making them Soft Keys.
This section describes how to:
Define the function of the Datamax printer keys
Setup what is displayed in the footer of your project screens
Soft Keys Setup
To enter Soft Keys setup, you must first have a project open. Then,
1
Click the System Setup button
on the left-
hand side of the main window
Alternatively, on the menu bar:
2
Click Project
3
Click System Setup
The System Setup screen is displayed as shown here:
4
Click the Soft Keys
button
October 2007
Page
112