Load firmware, Load firmware action, Load firmware and mcl system menu options – Datamax 123 Print v1.1x User Manual
Page 194
Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 7 : Deploying a Printer Project
7.4.1.
Load Firmware
Load firmware action
To load firmware into the printer
1
Select the Load Firmware action
A dialogue box is displayed as shown below. This allows you to select
the firmware and MCL System Menu you want to load into the printer.
Load firmware and
MCL system menu
options
2
Select the firmware you want to load into the printer, or
3
Click the browse
icon to browse for the firmware you want to
load
4
Next, select the MCL System Menu you want to load (if any) into
the connected printer, or
5
Click the browse
icon to browse for the MCL System Menu you
want to load
Note: To assure compatibility, make sure the version of the MCL
System Menu you are loading is the same as the version of the
firmware you are loading.
Notice that, in this example, both the firmware and the MCL System
Menu are version 1.20.
October 2007
Page
194