Datamax 123 Print v1.1x - Manual (Page 162)

Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 5 : Using Processes
5.8.2. Variable Concatenate
General introduction The Variable Concatenate command allows you to combine two or more
existing variables or constants into a new variable.
Variable Concatenate To concatenate variables, proceed as follows:
1 Add the process Variable Concatenate to your label program.
2 In the Data box, type a fixed value or select the variable you want
to concatenate.
3 To select a variable, click beside one of the Data boxes to open
the Variables dialogue box.
4 Select the desired variable and click OK.
5 Repeat steps 2 to 4 for the next variable.
When all the variables and fixed content have been identified for
concatenation,
6 Click beside the Result Variable box.
7 Select or create the variable that will contain the combined data
and click OK
8 Click OK
Example In this example, the fixed text (P) PRODUCT and the contents found in
variable [A1] are concatenated together. The result is saved in variable
[C0].
October 2007 Page 162