Datamax 123 Print v1.1x - Manual (Page 202)

Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 7 : Deploying a Printer Project
7.4.6. Load Any File
Load any file action To load firmware into the printer
1 Select Load Any File
A dialogue box is displayed as shown below
Load any file options In the load any file options area:
2 Select the file name of the file you want to load into the printer, or
3 Click the browse icon to browse for the file you want to load
4 Enter the Target Name. This is the name the file will have when
loaded on the printer. You must enter a target file name. If no
target name is entered, 123 Print will not load the file.
5 Select the target Location. This is the drive where the file will be
saved on the printer— drive D, G F, X, H, I or other depending
upon your printer model.
6 Click Load
October 2007 Page 202