Datamax 123 Print v1.1x - Manual (Page 86)

Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 3 : Creating a Project
Result Labels
The static LocationMCL2.btw label used in this Warehouse Shelving
example looks as follows:
When you run the label program you created for the Warehouse
Shelving example, your screen prompts will request Location and
Product Name for a given product. If you input a location of A78 – 25Z
and a product name of OAK BOOKCASE, then the variables you created
will contain the following:
ƒ [A0] Location = A78 – 25Z
ƒ [A1] Product_Name = OAK BOOKCASE
When you print the label using these variables and using the mapping
assignments made in the Mapping section, the resulting dynamically
created label will look as shown here:
8 Click OK to return to the Labels List window as shown below
October 2007 Page 86