Datamax 123 Print v1.1x - Manual (Page 72)

Copyright © 2007 • MCL Technologies • All Rights Reserved
www
.mcl-collection.com
Chapter 3 : Creating a Project
Default Value
Result Value
Output Format
Type a value or set a default value using the
contents of a variable. If you use a variable,
remember to assign a value to the variable
someplace in your label program
Select the variable in which the user input
should be stored
Set the format you want to use when saving the
input from the external barcode reader. Several
options are available such as fill blank on left,
fill zeros on left. Select the appropriate format
for your program design.
October 2007 Page 72