Lencore n.Form: MPI-6 - Manual (Page 12)

section 2
2.6 | relay outputs
10
Paging Priorities:
MIC all-call over phone.
MIC all-call over MIC zone.
Phone all-call over MIC zone.
Last MIC zone triggered over any playing MIC zone.
Phone zone over MIC zone.
All paging will duck music.
Audio inputs (figure 5) – The MPI includes 6 audio inputs – 5 stereo and one mono. Connect a line-level audio
source to any of the audio inputs using an RCA cable. The first five inputs are stereo inputs. If the source is
mono, slide the switch to the mono position and use the “M” input. The sixth audio input is mono only.
Note: For iNET, use Audio source 5 for Music and Audio source 6 for Paging.
Music:
Audio inputs 1 through 5 can be used for background music (audio input 6 is for paging only). The stereo inputs
can be used with a mono audio source. There is a stereo/mono switch by each stereo input that can select
between a stereo or mono signal. Each audio input can be adjusted for the proper level by turning the
associated potentiometer CW or CCW (figure 6). For iNET, use audio input 5 for music.