Lencore n.Form: MPI-6 - Manual (Page 4)

introduction
MPI-6
2
The MPI-6 is Lencore’s music and page interface to be used for Emerald and iNET
systems. The MPI-6 includes an analog phone line input as well as six audio inputs for
music or additional paging sources such as microphones. The MPI-6 also incorporates
relays to be used to trigger RAMP messages, strobes, or other external devices. Each
audio input is monitored by the MPI-6 and six banks of LEDs indicate the audio signal
level. The audio inputs can also be monitored by the internal speaker.
With the MPI-6 there is no need for additional cable home-runs, amplifiers, separate
equalizers, special switching equipment or matching vendors for compatible product
interfaces. The MPI-6’s technology is so sophisticated that it can allow zone additions,
modifications, deletions and other changes to the Mass Notification and Emergency
Communication (MNEC) solution or paging system on the fly, without rewiring. This
eliminates the need for running multiple home runs back to the electrical closet or
through building risers to create separate or additional zones
Link to product page