Lencore n.Form: MPI-6 - Manual (Page 7)

section 2
2.2| LEDs and switches
5
Power – solid when board is powered
Status – blinks every 8 seconds and solid when paging. Solid when an IR remote button is
pressed.
Relays status – solid when relay is closed.
Audio input level – six sets of three LEDs for audio input level detection. Yellow = low or no
input. Blue = good audio level. Red = audio input too high.
Service – solid when Neuron is in service.
Rx – blinks when Neuron is receiving data.
Tx – blinks when Neuron is transmitting data
LEDs
Six stereo/mono switches to select the audio input type. If using a mono audio source,
select mono to prevent any noise from the unused stereo input.
switches