Lencore n.Form: MPI-6 - Manual (Page 5)

section 1
1.1 | compo nents
3
• Power LED.
• Status LED.
• Input level LEDs for music and paging (RCA inputs only – not phone).
• Neuron status LEDs.
• Relays status LEDs.
• Analog phone input.
• Built-in output relays.
• Page on/off switch (pushbutton) for one audio input (single blue RCA).
• Built-in speaker for testing/troubleshooting.
• Rotary selector switch to select any one of the six audio inputs to play over the internal speaker.
• Five stereo/mono switches to ground one RCA input of the stereo inputs to prevent noise from
entering into the system from the unused RCA input.
• Service on/off momentary pushbutton to play pre-recorded music for testing/troubleshooting.
• Single turn pot for each of the 6 audio inputs (on front of enclosure for easy access) to adjust the
input level.
• Ability to use existing Global MPI.
• Two pems on front of MPI to mount a din rail for an iLON.
Components