Lencore n.Form: MPI-6 - Manual (Page 13)

section 2
2.7 | audio inputs
Audio input adjustment (figure 6) – There are six audio input adjustments – one for each audio input.
Using a flat-blade screwdriver, turn the adjustments CW to increase the input level and CCW to decrease
the input level. The ideal audio input level can be adjusted so the blue LED is on or flickering. Increase
the level if only the yellow LED is on. Reduce the level if the red LED is on.
Note: The music zones must be configured with Lencore’s Sound Manager or Reports software (iNET
only). For iNET, use audio input 5 for Music.
11
figure 5 - audio inputs