MBM Corporation BC 12 - Manual (Page 14)

12
3.3 Method of composition and imposition
The composition should be prepared based on your own design.
Imposition should be made based on the position and dimensions specified in the Prescribed Imposition
Format Table that can be processed by this machine (the table is given on pages 14, 15 and 16).
For imposition work, Illustrator is recommended for precisely laying out the dimensions and positions.
Use of templates
You may use templates for prescribed imposition (prepared by Illustrator), which can be downloaded
from the relevant software website.
You should lay out forms within the frame of the template.
∗For details, download and read the explanation of how to use templates.
∗Adobe Illustrator is a registered trademark of Adobe Systems Incorporated in the United States.
3.4 After completing composition and imposition, output the required quantity of products using a printer.
3.5 The top and bottom, and right and left margins may not be printed precisely according to the imposition. If this
happens, fine adjustments can be made using the Adjust Top Margin Key on the operation panel for the
vertical direction (along the long side of paper) and the slitter cartridge adjustment dial for the horizontal
direction (along the short side of paper). (For details, see page 24.)
3.6 If the paper is curled (bent, wavy, etc.), correct it by hand to make the paper as even as possible before
printing.
∗ Feeding curled or folded paper may cause a paper jam.