MBM Corporation BC 12 - Manual (Page 35)

33
8.3 Replacing the blade
∗ When cut edges are no longer crisp, it is time to replace the blade.
∗ If the short side of letter-size and legal-size paper (vertical direction when seen from the front of the
machine) is not cut well, the cutter unit needs to be replaced.
∗ If the long side of letter-size and legal-size paper (horizontal direction when seen from the front of the
machine) is not cut well, the slitter cartridge needs to be replaced.
∗ In either case, contact your dealer to place an order to a special agent or maker.
∗ The blades of the cutter unit and slitter cartridge built into the machine are highly durable and
developed for cutting general paper. If they are used to cut any paper other than the specified one, the
blades may become nicked and their durability severely deteriorated. Take great care to ensure that no
clips or staples enter the device together with paper.
8.4 Prohibition of disassembly
∗ Do not disassemble any parts other than those specified for maintenance in this operation manual.
∗ This machine was shipped after being optimally adjusted. Inadvertent disassembly could degrade
machine performance or cause failure, and could also cause an injury.
8.5 Others
∗ This machine needs no lubrication.
∗ Do not wipe the coated external cover, particularly plastic parts, using alcohol or solvent.
Doing so may damage the plastic surface or coating.
If you touch the blade inside the cutter unit or slitter cartridge, you could be seriously
injured. Never disassemble the cutter unit or slitter cartridge.
WARNING