MBM Corporation TRIUMPH 5551-06 EP (9 STEP MODULE) - Manual (Page 13)

- 13 -
B A
C
C
B
A
Optical cutting line indicator:
Optical cutting red line (
A), indicates the
position of the cut. Blade cuts on the front
edge of the light beam.
Mechanical cutting line indicator:
The clamp (
B) can be used as cutting line
indicator for cutting. Pre-clamping can be
performed using the foot pedal (
C).
Only use the optical cutting line indicator and
mechanical cutting line indicator when no
exact cut is required.
Position the paper on the backgauge ( A) and
side lays left or right ( B). To move paper
stacks, please use the paper knock-up block
(
C) provided.
(Run backgauge to the front for turning the
paper stack).
• Operation •