MBM Corporation CREASEMATIC AUTO 50 - Manual (Page 3)

Introduction
Crease Matic Auto 50
Designed and manufactured in the U.K., the new Crease Matic Auto 50 is a fully
programmable high speed card creaser. Documents are suction fed and creased at up to
7000 sheets per hour. It is possible to crease Digital and Litho printed card, removing
cracking that may occur at the folding stage.
The CM Auto 50 is capable of accommodating stock from CD-SRA2 (500x700mm), with
a capability to program a maximum of 29 creases per sheet anywhere along its length.
A maximum of 99 different jobs can be programmed and saved to the machines internal
memory, making the selection and recall of common jobs quick and easy.
Jobs are programmed in Absolute mode. All crease positions are measured from the
leading edge and entered directly. Incremental mode may be used to make image shift
adjustments with one alteration.
The machine is supplied with rotary perforation that is adjustable across the width of the
document, and four widths of slide-out and turn crease matrix as standard.
Auto50-ops-touch screen usa 4/3/2013 3