Setting outfeed tray – MBM Corporation CREASEMATIC AUTO 50 User Manual
Page 7
Advertising
Setting Outfeed Tray
Thumbscrews
Magnetic
Side Lays
Bottom
Stop Plate
The outfeed tray has two thumbscrews , one on each side. By loosening the thumbscrews
the bottom stop plate may be extended to allow larger sheets to be collected without
damage.
The magnetic side plates may be positioned to keep fed documents stacked accurately.
The outfeed tray can be removed in order to adjust the lower perforation wheel shaft.
Auto50-ops-touch screen usa
4/3/2013
7
Advertising