Measurement Computing DaqScan 2000 Series - Manual (Page 62)

10-2 Troubleshooting & Customer Support 898095 DaqScan/2000 Series
ReadMe Files and the Install CD-ROM
The Install CD-ROM includes ReadMe Files. These files often contain late-breaking information
that may not appear in the user documentation. During installation you should review the
ReadMe files when prompted to by the program.
The Install CD-ROM includes:
• DaqBook/2000 Series 1 Windows NT/2000/XP driver
• DaqX.DLL (32-bit API)
• Microsoft C/C++ API support
• Microsoft VB API support
• Daq Configuration Control Panel Applet
• User documentation in Adobe® PDF format
• DaqView
Upon installation, the user needs to run the Daq Configuration Control Panel applet. The
applet is used to configure the Daq device for an appropriate Ethernet Port. This must be
performed in order for the application to access the device through the Windows NT/2000/XP
driver.
1 DaqBook/2000 Series drivers also apply to DaqScan/2000 Series devices.
Driver Support
The daqX API can be used with WaveBook, DaqBook, DaqBoard, DaqLab, DaqScan,
Daq PC Card and TempBook product lines. All daqX functions share the daq prefix.
The API support examples can be found in the installed directory:
<Install> ProgrammingLanguageSupport\DAQ
Refer to the Programmer’s Manual, p/n 1008-0901.
DaqCOM Issues
DaqCOM support is contained within the Help file support, which is installed with DaqCOM. It
is located within the DaqCOM program group.
DaqCOM support will not be available unless it has been specifically installed with the product.
If the DaqCOM program group is not listed under programs (which can be accessed via the
Windows desktop), then you will need to install it from the data acquisition CD, or download it
from our website.