MicroLinks VT300 - user guide - Manual (Page 26)

24
functions for selection according to your own orientation.
Please refer to the following setting image. Press buttons of
, , and to select and adjust and to
confirm the setting. System will be back to the image of
system setting model after confirmation. Press button
(Comfirmation button) to quit the model.
(A) Date/Time : Setup Date and Time on the device.
(B) Timestamp : To decide to save Date/Time on the
bottom left of the image. Please note that the scale on
the image will not show if this function is activate. If
want to show the Timestamp on the image, please turn
off the scale function.
(C) Auto Power Off ： This function can help you shut off
the machine after a selected period of inactivity. Or to
choose “never” to skip this function.
(D) White balance : set white balance automatically for
switching on and off. Automatic white balance can
correct image‟s contrast and color. We suggest you
switch on automatic white balance to achieve optimum
result.
(E) Status display : Use the button to display the status.
The user can view status icons on the upper position for
an image.
(F) Factory default : Revert to factory default settings.
(G) Delete DSC/VID : delete VID and files in DSC folder.