MicroLinks VT300 - user guide - Manual (Page 37)

35
(2) Avoid temperature shock: temperature shock will cause
internal condensation inside the machine, for example, take
the product into a warm room from cold environment. Please
put the machine inside the protection bag or handbag in
advance to prevent temperature shock, and avoid using the
machine in an environment with over-high/low temperature.
(3) Avoid collision and drop: the product might go wrong by
strong collision, vibration or distortion.
(4) Shut down the machine before cutting off the power supply or
removing the battery: do not forced cut off the power supply
or remove the battery.
(5) Do not make face lens against strong light or sunshine for long
time: Strong light rays might degrade sensitive elements and
generate white stain on the image.
(6) Handle Removable accessories carefully. Do not violently
remove the accessory or crash the screen, Power Supply, USB
Cable, Battery Cover, and avoid to touch the Lens in the front
because above mentioned are easily caused damaged.
(7) Machine storage: please switch off power supply and remove
battery or unplug power cable, and store in a dry place with
excellent ventilation. Do not expose the machine in an
environment lower than -5℃ or higher than 50℃.
(8) Appropriate storage: while carrying, please put the machine
inside the protection bag to prevent it from being damaged
because of collision.
4.2 Product Sizes
Sensitive Element 2 million pixels CMOS
Lens High-sensitive Lens