MicroLinks VT300 - user guide User Manual
Page 28
26
accessories. Please use accessories provided together with the
machine including transmission line, battery, etc. Please do not
use other accessories, as this may cause severe damage or
incompatible to the machine.
(1) Connect USB Cable: The smaller connector end is used to
connect with the machine, the larger connector end is used to
connect USB port on PC. While connecting to computer,
power source can also be provided besides transmitting
images (PC Camera). Please refer to the following image for
the USB connection.
◎Caution: It is highly suggested to remove battery while
connect machine to PC.
(2) USB Power Supply: provide power supply for the machine by
USB cable and USB power supply. Smaller joint is applied to
connect microscope host, and the larger one is applied to
connect USB power supply (or USB connection port
connecting to computer can also provide power supply). The
installation is as follows.