Notice, Installation – Montigo DHS User Manual
Page 12
Advertising
Page 12
Hotshot Gas Fireplace Insert
XG0511 - 150203
Installation
Figure 11c. Installing the glass door.
Do not use ammonia based or abrasive cleaners on the glass, they will permanently
etch the surface. Use an approved gas fireplace glass cleaner such as Kel-Kem or
White off.
NOTICE
Installing the screen and door:
1. Push the door up along the front of the firebox until the top edge
of the door frame is underneath the Hotshot hood. Line up the screw
holes in the door with the corresponding holes on the front of the
fireplace and attach with the four screws.
2. Place screen over door and line up screw holes.
3. Attach with four screws.
4. Place screw covers over screws.
Advertising