NCast Telepresenter M4 - Manual (Page 21)

NCast Telepresenter Reference Manual
This parameter allows the operator to decrease the local loopback refresh loading. The local screen will still
be updated, but at a rate which provides some relief from excessive use. Reduce the setting from the “Full”
value if needed to maximize outbound transmission performance.
Obviously, a very low setting will impair the visual quality (in terms of motion) of the local display.
The Telepresenter supports standard VGA output and optionally (with an additional graphics card) DVI
output.
3.5. C
USTOM
S
ETTINGS
The Custom Settings page allows users of the Telepresenter to define unique dimensions for the Frame Size
(capture window), Aspect Ratios, Main and PIP windows, and Graphics and Text Overlay images. These
custom definitions are used in conjunction with Layout options in the Channel Table (see Section 4.4) and
settings on the Sources page(see Section 6.1), so it is necessary to understand Channel Layout options and
Source selections first to fully appreciate the custom definitions which are entered here.
NCast Corporation Revision 2.2
Page 21